******************************************************************
This patch applies to [EndPointSecurity 4.0], Build: [20081023]

This patch addresses the following:

-changing the communication IP is not possible  


Procedure to install the patch:

- close EndPointSecurity main application
- stop the GFI EndPointSecurity service
- replace the module opdeployment.dll from EndPointSecurity install path with the one included in this patch
- add the following attribute manualIPConfig="1" to Data\toolcfg_advancedsettings.xml from EndPointSecurity install path
Example: <Advanced mainIP="192.168.10.12" mainPort="1116" manualIPConfig="1" 
- start the GFI EndPointSecurity service
- start EndPointSecurity main application

******************************************************************